The spindle should be rotated in the specified direction and not reversed.
When the equipment is running, no hard foreign matter greater than 5mm should enter the machine, otherwise it should be shut down. If there are abnormal noises such as metal bump and friction in operation, check and eliminate them in time.
For solid-liquid mixing, it should be operated first, then sprayed. After spraying, the mixing can be continued for 3-5 minutes.
A material mixing time is usually about 5~8 minutes. The mixing time of special materials is determined by user test.
The particle size of the mixture is 20-1400 meshes, and the spray volume can be determined according to the adsorptive property of the material and the production process requirements of the users.
During use, lubricating oil for reducer and bearing should be changed regularly. The lubrication number of the reducer is carried out according to the specification of the reducer. Compound lithium grease for spindle bearings.
The shaft end seal adopts packing seal. Sealing material is usually oil-immersed asbestos. If a small amount of leakage is found in use, the pressure bolt of the filling box cover should be tightened.